1D Surface

v3.11

Bug Fixes:

• Fixed a bug where the Exit item under the File menu did not do anything.
• [WR1D]  Fixed a bug where the original cross-sections are not connected correctly if extra cross-sections were inserted and then the network was reset.
• [WR1D]  Fixed a bug in the conversion of WR1D file where the left-bank point index was lost if it was part of a starting descending run that was discarded.
• [Structured GIS]  Now use CHAR(1) as the default field type.

 

v3.10

Bug Fixes:

• [SOBEK]  Fixed some bugs in creating WR1D file from SOBEK 1D and creating the surface related to unicode in Delphi 2009.
• [MIKE11]  Fixed a problem with the high X values of cross-sectiona points was causing precision error that resulted in incorrect matching of duplicated run of X-Z points.
• [MIKE11]  Fixed a problem with incorrectly counting the length of duplicated run of X-Z points in cross-sections.
• [MIKE11]  Fixed a problem that may occur with closed cross-sections.  It now ignores cross-sections with closed channels.
• [MIKE11]  Now when running res11read.exe, it automatically writes the text file to the temporary folder first before copying the file to the proper location to avoid slow speed when the file is on the network.
• [MIKE11]  Can now process very large RES11 text files without running out of memory.
• [WR1D]  When selecting cross-section points, it will now only allow the relevant point to be selected, e.g. left and right points when stretching a cross-section and the centre point when deleting cross-sections.
• [WR1D]  Added tools for adding/deleting extra cross-sections between two original cross-sections.
• [XP-Storm]  Added a tool for converting XP-Storm output spreadsheet to structured GIS format.
• [Structured GIS]  Added a tool for preparing the indices of structured GIS file
  using the centreline.
• [Indexed Contours]  The create TIN surface from indexed contours tool has been moved to the new menu “GIS X-Sects”.
• [MIKE11]  Now supports variable Manning’s n for the cross-sections.
• [MIKE11]  After calculating the velocity along each point of a cross-section, it now normalises the values so that the calculated total flow matches the original flow value.
• [MIKE11]  Now no longer tries to create the *.wr1d file if the conversion from binary RES11 file to ASCII format fails.
• [MIKE11]  Fixed a bug that caused the time-varying data not read in correctly if the lines with unit names in the RES11 ASCII file are blank.

 

v3.05a

New Features:

• Added a tool for creating TIN from indexed contour lines.
• Added VICGRID94 to the supported projections.

 

v3.01

Bug Fixes:

• [HECRAS-SDF]  Fixed bug with “*” in river stations of interpolated x-sects in the results file.

 

v3.00

New Features:

• Added support for network license server.
• [wRLibNew] added to project

 

v2.74

New Features:

• [DRAINS]  The data/results import tool is now more robust and can no longer assume column numbers.
• [DRAINS]  Now support basins in the network as well.

 

v2.73

Bug Fixes:

• [MIKE11]  Fixed a bug that caused the program to go into an infinite loop when creating a WR1D file from MIKE11 with no X-Y coordinate values, i.e. all (0,0).
• General library updates.

 

v2.72

Bug Fixes:

• General library updates.
• New vmscr file.
• Single executable file for both standalone and network dongles (/network).
• [HECRAS]  Made the reading of the cross-section CSV file more robust
• [HECRAS]  Can now handle simplified results file with only Reach, River Sta,
  Profile, W.S. Elev and Vel Chnl columns.
• [Data Layers Dialog]  Fixed a bug that resulted in no layers being removed
  from the current view if all layers were unchecked.
• [wR Profile]  Added the option to specify the channel velocity factors in
  the cross-section (‘ChannPointVels’).
• [HECRAS]  When importing HECRAS model using the profile points method, the river name is no longer case sensitive and the name may contain spaces.
• Started using the Ini file in the user’s application data file.
• [MIKE11]  The program now asks the user to select Res11Read.exe the first time, instead of hard-coding the location.
• [MIKE11]  Now supports the MIKE11 2008 version ASCII file format with the possible georeferenced data of cross-sections.
• [MIKE11]  Now cleans up any duplicated points or run of duplicate points inv2.60  (
• [Imglayer]  Changed to give the warning message about ECW or MrSID DLL’s not found only once.
• [Imglayer]  ECW and MrSID DLL files can now be located in a common folder
  instead of the local directory of the application.
• Fixed a bug in the Quick Start dialog where the project would not be
  initialised correctly if the Open Existing project option was selected and
  then the user selected Cancel in the open file dialog.  This resulted in a
  range check error when adding a layer afterwards.
• [WR1D]  The status bar now shows the map information when the move, delete or restore tool is selected.
• [WR1D]  No longer assumes that the branch points section of the ASC file is
  sorted when converting ASC to WR1D.
• [WR1D]  Fixed the problem where there was no TIN between two cross-sections if there was no type 2 point between them.
• Fixed a potential problem of reading CSV text with an empty string surrounded by quote characters (i.e. “”). the cross-sections.
• [MIKE11]  Now attempts to fix any points not in descending order and discards them if not possible.  Final cross-section points would be in ascending order.
• [MIKE11]  Now the user no longer deals with the MIKE11 ASCII files explicitly.
• *.wr1d is created directly from *.res11 and the *.res11 files are processed
  directly into WRB files.  The MIKE11 ASCII files (*.res11_txt) are created
  automatically as needed.
• [SOBEK]  Sobek version information is now saved in the user’s application data INI file.
• [MIKE11]  Fixed a bug in the creation of WRB that causes the water level of the left point of the first cross-section to be overwritten by water levels of
  cross-sections of deleted branches.
• [HECRAS]  Fixed a bug where if there is a ‘*’ in the station value of a cross-section of a SDF file, the cross-section would not be read correctly.
• [WR1D]  Need to hold down the Alt key to cycle through points that are close to each other.

 

v2.60

Bug Fixes:

• [Imglayer]  Changed to give the warning message about ECW or MrSID DLL’s not found only once.
• [Imglayer]  ECW and MrSID DLL files can now be located in a common folder
  instead of the local directory of the application.
• Fixed a bug in the Quick Start dialog where the project would not be
  initialised correctly if the Open Existing project option was selected and
  then the user selected Cancel in the open file dialog.  This resulted in a
  range check error when adding a layer afterwards.
• [WR1D]  The status bar now shows the map information when the move, delete or restore tool is selected.
• [WR1D]  No longer assumes that the branch points section of the ASC file is
  sorted when converting ASC to WR1D.
• [WR1D]  Fixed the problem where there was no TIN between two cross-sections if there was no type 2 point between them.
• Fixed a potential problem of reading CSV text with an empty string surrounded by quote characters (i.e. “”).

 

v2.52

Bug Fixes:

• WaterRIDE library update.
• [WR1D]  Fixed a bug an access violation error that occurred during the adding
  of extra TIN triangles if the network contains extra TIN triangles belonging
  to deleted cross-sections.
• [HECRAS]  When importing HECRAS model using the profile points method, it now no longer expects the river name if there is only a single river.

 

v2.51

Bug Fixes:

• [HECRAS]  Now supports the importing of HEC-RAS ASCII GIS export (*.sdf)
• Fixed a bug where the zoom window was stuck on the top-left corner if a wR1D layer was active.
• [WR1D]  The add triangle tool now uses the highlighted node rather than try
  to find a new node using the coordinates.
• [WR1D]  The delete triangle tool now deletes the highlighted triangle instead
  of trying to find a triangle at the mouse cursor.
• Toolbars that are currently not available are made not visible instead of
• Fixed the problem where if multiple points are on top of each other, only
  one could be selected.
• [WR1D]  Added tool buttons for deleting and restoring objects.
• [WR1D]  Removed the enter and delete keys for deleting and restoring objects
• [WR1D]  When exporting network to GIS, if the projection of layer is not set,
  a dialog box will prompt the user to select the projection to use.  This avoid
  the non-earth projection problem when the GIS files are imported in MapInfo.
• [WR1D]  Now write out the real extent for the exported GIS network.
• [WR1D]  Sped up the reading of the MIKE11 time-step by not processing
  unnecessary data.
• [WR1D]  Now only draws the outline of the cross-section TIN instead of all
  the triangles to save the re-TINning and redrawing time.  It was a problem
  for large networks which were taking several seconds each time to re-TIN
  and to redraw.
• [HECRAS]  Fixed the problem where the ‘*’ in the river station values of some
  result files was crashing the conversion process.

 

v2.50

Bug Fixes:

• [WR1D]  Processing MIKE11 result files now supports choosing time-step
  size to save the results.
• [DTM]  Added support for DTM files that contain terrain only.
• Can no longer add the same file twice in the data layers dialog.
• Reorganised and rationalised the menu items for converting 1D models [dmc].
• Now need to select a tool before dragging and moving points in a wR1D network.

 

v2.21

• New cursor for the info mode.
• [wR1D]  When converting MIKE11 binary file to ASCII, or MIKE11 ASCII to wr1d files.  The original file name is given as the default output file name
• [wR1D]  Added batch MIKE11 binary to ASCII file conversion.
• [wR1D]  Fixed bug for factor coords where the new coordinates were not
  written to the wr1d file.
• [wR1D]  Fixed the bug where when the extent of a cross-section is resetted in
  memory, the first and the last cross-section points were used instead of the
  left and right extent points.
• [wR1D]  Fixed bug when processing MIKE11 files, the output WRB files were
  written in the same directory as the input ASCII file instead of the specified
  output directory.
• [wR1D]  When processing a single MIKE11 results file, the file name of the
  input MIKE11 ASCII file is suggested as the file name of the output WRB file.
• [wR1D]  Now the wR1D layer takes into account the left and right cross-section points as well as the branch points when determining the layer extent.
• Added the mouse wheel adjusting zoom factor feature.  Zoom factor is displayed on the status bar.
• [wR1D]  Fixed the problem with the extra TIN triangles not removed correctly
  when the branch of a TIN triangle point is inactive.
• Coordinates are now displayed even where the project is not saved.
• Coordinates are displayed for mouse position when zooming and panning tools are active.
• [HECRAS]  The processed HECRAS surface now contains only water level and
  velocity data.  No more dummy ground level and DELVAL VxD and hazard values.
• [GIS]  More efficient GIS shape search.
• [RST]  Enabled support of RST layers in wR-1D.
• [Generic 1D]  Added support for time-varying generic 1D models [camd].
• [Generic 1D]  Added a tool for converting coordinate projections [camd].
• [Generic 1D]  Added a tool for copying the TIN extents of generic 1D models
  (for time-varying files) [camd].
• [DRAINS]  Fixed a bug where commas in the text of the DRAINS export files
  were causing parsing errors.

 

v2.20

New Features:

• Added support for batch processing of MIKE11 and SOBEK results files.
• (wR-1D) – Added support for processing files produced by earlier versions of SOBEK.

Updated Features:

• (wR-1D) – Changed the order of some dialogs to a more logical order.
• A few general improvements to the user interface.
• Some miscellaneous improvements to the display.

Bug Fixes:

• (wR-1D) – Fixed several problems associated with using projections for a wR-1D layer.
• (wR-1D) – Fixed a problem where MIKE11 ASCII result files may not be read correctly if a branch name exceeds 15 characters.
• (wR-1D) – Fixed several problems with the processing of SOBEK 2D result files.
• (wR-1D) – Fixed a problem where some cross-section points may not be selectable with the mouse if they are too close to each other.
• (wR-1D) – Fixed a memory efficiency problem that causes the application to slow down gradually when editing a network.
• Fixed a problem in the calculation of custom hazard categories.
• (HEC-RAS) – Fixed the direction of HEC-RAS model velocity vectors.
• Minor Bug Fix (wR-1D) – Fixed various flow-logic problems in a few dialogs.

 

v2.11

New Features:

• (wR-1D) – Added support for the addition and removal of extra TIN triangles.
• (wR-1D) – Added support for converting waterRIDE MIKE11 *.can files to waterRIDE 1D Surface *.wrcanfiles.
• (wR-1D) – Added the MIKE11 binary to ASCII file conversion tool to the menu.
• (wR-1D) – Ctrl-A now selects all lines in the *.wrcan editor.

Bug Fixes:

• (wR-1D) – Fixed a bug where the angle of a cross-section may be calculated incorrectly for a network.
• Minor Bug Fix (wR-1D) – Fixed several minor display errors.

 

v2.10

New Features:

• (wR-1D) – Added support for MIKE11 models, superceding waterRIDE MIKE11.
• (wR-1D) – Pressing ‘R’ when a wR-1D layer is active is a shortcut for setting the layer to use the random palette.

Updated Features:

• Feature (wR-1D) – Changed the file format of the *.wr1d file. Existing *.wr1d files will have to be recreated. This has no effect on existing *.wrcan files.

 

v2.01

New Features:

• Added the export view function.
• (wR-1D) – Added the export wR-1D network to GIS function.
• (wR-1D) – Added the support for the best-effort recreation of an existing *.wrcan file of a different wR-1D network.
• (wR-1D) – Holding down the Ctrl key now locks the length of a cross-section when it is being dragged.

 

Updated Features:

• Update Existing Feature (wR-1D)- Deleted cross-sections of a branch will now be TIN’ed across between the upstream and downstream cross-sections.
• Update Existing Feature – Added some hint text to the menu items.

 

v2.00

New Features:

• New Feature – Added support for generic link-node models.
• New Feature – Added support for SOBEK 1D and 2D models.

Bug Fixes:

• Bug Fix – Fixed the image registration feature.